MM Future Technology LLCQuantity Takeoffs and Estimating
Drawing and scope review, quantity takeoffs, panel layouts, material lists, and scheduling.
Florida, United States · Established in 2020
My Family, Safe Forever.
We provide planning, quantity takeoffs, estimating, material supply, and installation for EPS-core SCIP panel systems.
View Our WorkDiscuss Your ProjectHow SCIP Panels Work
Continuous EPS Core
The EPS core provides thermal insulation within the wall assembly. Performance depends on thickness and system configuration.
Wire Mesh and Connectors
Welded wire mesh sits on both sides of the core. Steel connectors tie the two mesh layers together through the panel.
Field-Applied Coatings
After installation, crews apply the coatings specified for the project. Design and detailing are verified for the selected system.
SCIP Technical Illustrations
Select an illustration to enlarge it. Dimensions and anchors shown are illustrative. Follow the approved drawings and applicable technical documentation for each project. Wind, fire, and impact performance depend on the assembly and applicable testing.
Panel layout, corners, openings, and installation.
English reading guide
The sheet shows structural walls, interior and exterior 90-degree corners, door and window openings, slab anchorage, opening reinforcement, and T-junctions. It also illustrates the wall-to-slab section, typical panel sizes, and installation from layout to final finishes. Use project-approved drawings for dimensions and anchorage.
- Wall layout
- Exterior SCIP wall, 90-degree corner, door opening
- Connection details
- Interior and exterior corners, door and window openings, slab anchorage, opening mesh, T-junction
- Wall section
- Structural mortar on both faces, EPS core, welded wire mesh, concrete slab
- Installation sequence
- Layout, starter bars, panel placement, reinforcing mesh, structural mortar, finishes
Illustration of a home exposed to a storm.
English reading guide
The illustration depicts a home in hurricane conditions. Wind and debris performance depend on the tested assembly and project design.
Illustration of conditions that require specific testing.
English reading guide
The source illustrates fire exposure and ballistic impact. Any rating applies to the specific tested assembly and test conditions.
Illustration of exposure to pests and chemicals.
English reading guide
The source illustrates termite and chemical exposure. Protective measures depend on the product and project conditions.
Illustration of the role of the EPS core.
English reading guide
The source illustrates thermal insulation and sound control. The EPS core and the complete assembly influence performance.
Illustration of service conditions.
English reading guide
The source illustrates impact resistance and durability in service. Performance depends on the selected assembly and exposure.
Cover illustration from the company profile.
English reading guide
Company profile cover. My Family, Safe Forever.
Original illustration from page 12 of the company profile.
English reading guide
Company illustration series covering hurricanes, fire, ballistic impact, chemical exposure, termites, thermal and acoustic insulation, impact, and durability.
History and Applications of SCIP Panels
Explore how SCIP panels are manufactured, assembled, and installed. Select any illustration to enlarge it.
History and Manufacturing
Enlarge illustration
English reading guide
The illustrated timeline traces three-dimensional mesh-and-core panels from their early development in the 1960s and 1970s through industrial production, wider building applications, and use in multiple countries today.
- 1960s–1970s
- Early three-dimensional panels with steel mesh and an EPS core
- 1980s–1990s
- Industrial production and wider use in buildings
- 1990s–2000s
- Refinements in design, production, and concrete application
- 2000s onward
- Wider adoption and applications across multiple countries
Enlarge illustration
English reading guide
The source traces the development of wire matrices and manufacturing equipment in the 1970s and illustrates automated production of panels with steel meshes, diagonal connectors, and an EPS core in the 1980s.
- 1970s
- Development of three-dimensional wire matrices and manufacturing equipment
- 1980s
- Automated European production with two meshes, diagonal connectors, and an EPS core
- On site
- Panels completed with sprayed concrete or mortar
Enlarge illustration
English reading guide
The illustration highlights EVG in Austria and M2 Emmedue and Schnell in Italy as industrial references for automated production and applications in walls, slabs, roofs, and stairs.
- EVG · Austria
- Automated production lines and wall and slab applications
- M2 Emmedue · Italy
- Integrated panel construction system
- Schnell · Italy
- Panel manufacturing machinery and systems
Enlarge illustration
English reading guide
The sheet shows Schnell Home manufacturing machinery and the Concrewall assembly with welded galvanized steel meshes, diagonal connectors, and an EPS core. Its examples include wall, roof, floor, and stair panels.
- Manufacturing
- Schnell Home machinery for building components
- Concrewall assembly
- Welded galvanized steel mesh, diagonal connectors, and an insulating EPS core
- Applications
- Wall panels, roof and slab panels, and stair panels
Components and Details
Enlarge illustration
Enlarge illustration
Enlarge illustration
Field Applications
Enlarge illustration
English reading guide
The illustrated M2 sequence covers receiving and storage, layout and starter bars, cutting and placement, joints and reinforcement, openings and lintels, building services, alignment and bracing, pre-application inspection, spray application, curing, and final checks.
- Preparation
- Receiving and storage, layout and starter bars, panel cutting and placement
- Reinforcement and services
- Joints, reinforcing mesh, openings and lintels, electrical and plumbing
- Inspection and coating
- Alignment and bracing, pre-coating inspection, sprayed mortar, curing and final checks
Enlarge illustration
English reading guide
The illustration shows field assembly of walls, corners and junctions, openings, building services, and panels for slabs, roofs, and stairs.
- Wall assembly
- Wall panels, corners, junctions, and openings
- Other applications
- Floor slabs, roofs, and stairs
Enlarge illustration
Enlarge illustration
Services
Architecture and Engineering Coordination
From initial sketches to construction documents, with coordination across architecture, structure, and building systems.
Supply and Logistics
Coordination of panels, mesh, reinforcement, equipment, shipping, and deliveries in installation order.
Installation and Supervision
Crew organization, wall and slab panel installation, and coordination of coatings and finishes.
Field Work and Installation
Project photography from the company profile and the leadership team's professional portfolio.
Hollywood, Florida
Residential Buildings in Hollywood
Wall and slab installation, interior layouts, and coordination of work areas.
View 6 photos and details →
Field Experience
Single-Family Homes
Building envelope and roof installation, temporary supports, and opening preparation.
View 5 photos and details →
Technical Portfolio
SCIP Panel Installation Details
Installation sequence and details visible before the coating is applied.
View 5 photos and details →Residential Buildings in Hollywood
Wall and slab installation, interior layouts, and coordination of work areas.
Single-Family Homes
Building envelope and roof installation, temporary supports, and opening preparation.
SCIP Panel Installation Details
Installation sequence and details visible before the coating is applied.
Project Planning and Technical Support
Villa del Mar
Lake Placid, Florida
Takeoffs, quantity review, and a SCIP panel proposal for a phase of 42 homes across six buildings.
View Project Details
Agosto–septiembre de 2026
Prepared takeoffs and technical and cost documentation for a six-building phase. The proposal established quantities to evaluate the SCIP panel system.
Vista Park Living Apartments
Lamesa, Texas
Drawing review and preliminary estimate for a three-story, 36-unit building.
View Project Details
September 2026
Cataloged the drawings, identified information needed, and prepared the preliminary estimate.
K Reilly Residence
Efland, North Carolina
Site condition review, takeoffs, and a proposal for repairs, coatings, and surface finishing.
View Project Details
Octubre–noviembre de 2026
Measured surfaces, reviewed site conditions, and evaluated materials and logistics to prepare the proposal.
Julio Martí
Founder and CEO of MM Future Technology LLC. He has more than 24 years of experience in industrialized construction, panel installation, logistics, and operations.
His experience includes technical leadership and field coordination in the Caribbean and United States, panel systems and production management training with M2 Italia, and a Concrewall installer credential issued by Schnell S.p.A. in 2025.
Let's Discuss Your Project
For a scope review, please have the project location, available drawings, and current construction phase on hand.
Call +1 (786) 720-5829 juliomm_ceo@mmfuturetech.com